Scoppy - Oscilloscope1.031 - Google Play
You'll be able to see results in few seconds.
Publisher Description
Oscilloscope and Logic Analyzer powered by your Raspberry Pi Pico
Combine the Scoppy app with a Raspberry Pi Pico or Pico W to create a 500kS/s oscilloscope and 25MS/s logic analyzer.
Key Features:
- Wireless connectivity with the Pico W
- Horizontal scale and position adjustments
- Vertical scale and position adjustments
- Trigger channel and level selection
- Rising edge and falling edge triggers
- Auto and Normal triggering
- Continuous (Run) and Single capture modes
- Memory depth up to 100kpts for single captures
- Vertical and Horizontal Cursors
- Auto or fixed sample rate
- % pre-trigger samples setting
- Signal Generator
--- square wave (100Hz - 1.25MHz)
--- 1kHz PWM sine wave
- X-Y Mode
- FFT
--- Hann, Hamming, Blackman and Rectangle windows
--- vertical and horizontal cursors
--- dBm, dBmV and V vertical units
--- option to display both channels simultaneously
--- option to display the scope window alongside the FFT
- Probe attenuation settings eg. 1X, 10X, custom
Oscilloscope
- Two Channels
- Up to 500k samples per second (shared between channels)
- Time/Div: 5us - 20secs
- Up to 4 configurable voltage ranges per channel (see help for details)
Logic Analyzer
- Eight Channels
- Up to 25M samples per second (per channel)
- Time/Div: 50ns - 100ms
Analog Front End
Connect the input signal directly to the Pico ADC pins for a 0-3.3V input range or build your own analog front end to extend the input range. Several cheap and easy to build open-source designs can be found at oscilloscope.fhdm.xyz. Affordable front ends are also available for purchase at store.fhdm.xyz.
More information
More information including instructions for installing the free firmware onto your Pico or Pico W can be found here: https://github.com/fhdm-dev/scoppy and https://oscilloscope.fhdm.xyz
About Scoppy - Oscilloscope
The company that develops Scoppy - Oscilloscope is FHDM TECH. The latest version released by its developer is 1.031.
To install Scoppy - Oscilloscope on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2025-07-29 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Scoppy - Oscilloscope as malware as malware if the download link to xyz.fhdm.scoppy is broken.
How to install Scoppy - Oscilloscope on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the Scoppy - Oscilloscope is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by Scoppy - Oscilloscope will be shown. Click on Accept to continue the process.
- Scoppy - Oscilloscope will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version 1.031
posted on 2025-07-29
Android 16 compatibility
Export function now uses integers instead of floating point for logic analyzer sample data
version 1.030
posted on 2024-03-16
* Minor fix to the display of the current sample rate and record length
* Better feedback during single shot captures at very slow sample rates
* A setting to quadruple the max. sample rate of the RP2040 to 2MS/s. This requires firmware version 17 or higher.
version 1.029
posted on 2024-03-16
* App can be displayed in both landscape orientations
* Probe attenuation is saved to settings
* Roll mode is now automatic
* Single shot now always waits for a trigger
* Can connect to device via hotspot network
version 1.027
posted on 2024-02-06
Math channels
XY Mode improvements
version 1.025
posted on 2023-04-23
* A 'Reset Connection' option has now been added to the connection menu (tap the connection badge at the lower left of the screen). Use this if the app is taking too long to connect to the Oscilloscope.
* When configuring the firmware Wi-Fi settings, the AP name (SSID) can now be selected from a list (rather than having to be typed in manually). Android will ask for location permission settings when this feature is used for the first time.
* Reduced min Time/Div to 1us
version 1.026
posted on 2023-04-23
* Tapping the ROLL button will enter (and leave) roll mode.
* Record length can now be set to a fixed value (tap the displayed record length at the top of the screen)
* Added support for the FHDM DSO500K-U oscilloscope
version 1.022
posted on 2023-03-23
Sin(x)/x interpolation
Firmware GPIO mappings can now be configured from the app
Firmware channel settings can now be configured from the app
Maximum number of voltage ranges per channel increased to 8
Support for analog front-ends with inverting configuration
Disclaimer
Official Google Play Link
We do not host Scoppy - Oscilloscope on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Scoppy - Oscilloscope is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
